**Custom build high-beat (28800 bph) Santos style watch with perlaged Seagull ST2100 movement (Asian 2836-2)** I'm selling this new, unworn custom-built Cartier Santos style watch with a "F*ck 9-5" sterile dial. It is powered by a perlage decorated Seagull ST2100 movement, which is based on the ETA 2836 specification. The movement has been modified to be a true no-date movement with only two crown positions. There is no phantom date, so there is no need for concern about the inadvertent changing of a hidden date wheel while in the "danger zone". NOTE: The watch is new, but the polished bezel did pick up some small scratches during the build and testing process. These scratches are small enough that they aren't picked by the images. Here is a [video](https://imgur.com/gallery/santos-style-watch-with-seagull-st2100-eta-2836-spec-inkpSIK) showing the seconds hand ticking at a smooth 8 times per seconds. The movement's been regulated per the timegrapher screenshots. I can't guarantee you'll receive it as such, since conditions may change during shipping. * Price: $250 with free USPS Priority Mail shipping (US addresses only) * Payment Method: PayPal, Zelle, or Venmo * Trades: No **Watch features:** * Sea-gull ST2100 modified for use in a no date watch (two crown positions and no phantom date) * 4 Hz or 28,800 bph beat rate * Central hour, minute, and seconds hand * 28 jewels (per [Seagull specs](https://www.tjseagull.com/pd.jsp?id=8&fromColId=0#_pp=0_398_11)) * 42-hour power reserve (per [Seagull specs](https://www.tjseagull.com/pd.jsp?id=8&fromColId=0#_pp=0_398_11)) * High-end thermally-blued watch hands (NOTE: These are proper-length ETA-compatible hands and not the typical stubby hands that are designed for the NH35.) * Sterile "F*ck 9-5" Santos style dial * Stainless steel case with 7-sided crown and exhibition case back * Stainless steel (straight pin) bracelet with butterfly clasp * Curved mineral crystal * 30 m (3 ATM) water resistance **Dimensions:** * Case width (excluding crown and crown guards): 38.4 mm * Thickness (center of crystal): 11.54 mm * Lug width: 21 mm * Lug-to-lug: 47.97 mm **Build and usage notes:** * The movement was converted to a true no date movement by replacement of the setting lever to a 2-function version with only winding and time-setting crown positions (i.e. no phantom/ghost date). * The original white plastic movement holder that came with the case was been replaced with a custom 3D printed movement holder with a more discreet bronze color. * The case back screws were treated with Vibra-Tite to reduce the likelihood of vibrating loose. * The case was water pressure tested to 30 meters (or 3 ATM) using home testing equipment. It should be OK for minor water exposure such as light rain and hand washing. It should be worn while swimming/diving or bathing/showering. * While the case has a 7-sided crown, which is easier to turn than a hexagonal crown, the smooth, flat surface of the crown is much more slippery than a typical textured crown, especially as the mainspring gets closer to fully wound.